A-281C Control Board

A-281C Control Board

Microair
SKU:
ASY-555-X0A
€326.70
(No reviews yet)
Current Stock:

Call 01202 739 937 for lead time

Out of Stock
Description

Replacement A-281C Control Board | 85 to 240 Volts

The A-281C Control Board is part of a legacy DX cabin control system sold in the mid-1990s. This is a newly manufactured, footprint-compatible replacement that operates identically. The display interface can use either the legacy 4-conductor cable with Molex connectors on each end or the newer 6-conductor RJ-12 cable with straight-through wiring.

Note: Shown with Pin Connectors (most units before 1999).

Guides & Information

Before You Buy

This board was used in Cruisair systems in the 1990s and early 2000s. Original boards measured 7” x 6.25” [17.8cm x 15.9cm] and featured a four-pin display jack and three-pin sensor jack, usually protruding through an opening in the enclosure. A distinctive line of spade connectors ran along one side of the board, spanning the entire length.

Original boards were typically marked with the number 42403 and often had either A-281C or A285 marked as well. This board replaces Cruisair part number 42403 and Dometic part number 701800007 control boards. It also features the newer six-pin display connector, allowing an upgrade to the SMXIIir display without needing an adapter.

Features

A-281C Power Logic Control Board:

  • Replaces the A-285 board, legacy boards with part number 42403, and legacy boards with part number 701800007.
  • Replaces similar DX SMX power/logic boards discontinued by Cruisair®.
  • Maintains the original footprint and connection locations.
  • Compatible with both legacy 4-conductor Molex connectors and 6-conductor RJ-12 display connectors.
  • Supports multi-voltage operation (100-240VAC).
  • Retains all original software and hardware functions.
  • Dual voltage capability ensures a single trigger replaces either type.

Replacement OEM A/C Controls

  • Superior to the Originals
  • Identical Operation
  • Newly Manufactured
  • Footprint-Compatible